The contents
Offered by the company are plaster of white in all respects meets the requirements according to the finishing materials. In its composition the manufacturer introduces an additional component is perlite, which reduces the setting time of mortar. Perlite is produced from natural mineral mica, increasing after curing, acquiring excellent thermal insulation characteristics.
Gypsum plaster Teplon unis is different from other plasters negligible weight, aesthetic appearance, this material performs the function of thermal protection of the dwelling.
Among the main advantages of plaster Teplon, professionals allocate the maximum strength of the coating. Plaster layer designed to be worn across treated surfaces with thickness up to 5 cm, remove the bumps with a depth of 5-7 cm.
The plaster of the ceiling surface ↑
Mortar plaster Teplon align and vertical walls and horizontal ceilings. In the plaster of the ceiling using a standard algorithm, reducing the thickness of the plaster layer up to 3 cm.
Technical parameters of for the ceiling:
- improved thermal insulation properties of the ceiling;
- a minor load-bearing structures;
- adhesion of the solution;
- the strength of the resultant surface;
- ease of application (ease of application due to the negligible weight of the mixture, excellent ductility, homogeneity consistency of the plaster mixture).
When applying this composition on the ceiling, no problem, he quickly smoothed, easy to align. The coating has a characteristic smooth, glossy or matte kind.
How to work with plaster of Paris unis ↑
When working with plaster it is necessary to pass following stages:
- Surface preparation. With the help of plaster Eunice, you can create a smooth, homogeneous, smooth surface without fear of the appearance of shrinkage cracks, if you properly prepare the wall (ceiling) to work. First you need to check the strength of the surface, dry it. Old paint, plaster, putty that is loosely kept on the wall, remove the building with a spatula. The area being treated is cleaned of dust, get rid of the oil or tar contaminants. If necessary, on the surface, make a 2-3 cm incision, increasing the adhesion between mortar plaster and the surface. The Council! It is desirable to conduct the surface treatment of the highly penetrating compositions, selecting them based on specificity grounds (for aerated concrete, foam concrete is 2-3 layer coating).
- Preparation of the solution. It is important to observe the proportions of water and compound, which are listed on the packaging of the mixture. The mixture was maximum performance, it is important to thoroughly mix the components, using an electric mixer with attachments. After initial stirring the solution for 10-15 minutes, leave, then re-mix. The introduction of a mixture of gypsum cement speeds up setting time, so the finished mixture should be used within 40-50 minutes after cooking. The second time breed mix is not recommended, solution will have low technical specifications.
- Application of the solution. For the application of gypsum plaster mass Yunis Teplon will need a spatula or trowel. Optimal tools are made of high quality stainless steel (not the subject of corrosion). Before the mixture begins «grab», it is important to treat the plaster surface rule, eliminating bumps and roughness. After 1.5–2 hours after drying, a layer of white plaster Eunice Teplon treated with a special sponge float. As soon as the gypsum plaster mix has dried, you can start painting the wall (ceiling) or wall surface Wallpaper. There is no need to waste time and money on applying finishing putty.
The scope of application of plaster unis ↑
This finishing material suitable for a variety of actions:
- the implementation of facade work;
- interior trim.
Such gypsum plaster ensures the alignment of walls and ceilings in rooms with normal humidity (gypsum composition is not suitable for leveling surfaces in bathrooms and toilets).
Plaster Eunice Teplon suitable for brick, concrete, wooden walls, its main component is gypsum with mineral additives.
Unis of White: technical parameters ↑
Gypsum plaster Unis of White has the following technical parameters:
- Strength 2.5 MPa 1 cm (finished surface able to withstand pressure up to 25 kg). The adhesion strength of the mixture with the surface is estimated at 0.1 MPa, which is good for mixtures used in interior decoration.
- No need to use a reinforcing mesh when working with Teplodom White. Whatever the composition of the base surface, priming is an obligatory stage. The layer thickness of the finished trim is 50 mm. Working with Teplodom does not involve the installation of beacons on the first stage, they will be required when performing finishing of the plastered surface. Application of a new layer is carried out only after previous coat is completely dry.
- The average consumption of plaster Teplon is for 10 kg of 4.5–5 liters. The duration of the viable period of the finished plaster– 50 minutes. The manufacturer offers a mixture of 15 and 30 kg, the choice for the buyer.
- The temperature indoors should be in the range from -5 to +30 degrees. Such temperature mode allows the plaster to gain maximum strength, thermal insulation characteristics, to avoid shrinkage, small cracks.
The cost of Material White ↑
- Small consumption of the mixture compared to sand-cement compositions, a great advantage Material.
- A layer of plaster in the same 4-5 mm brickwork in 1-1,5 bricks.
Conclusion ↑
Gypsum plaster with additional plasticizers and fillers of fit for complex surfaces of ceilings, uneven walls. Such compounds are of reasonable cost, easy to use, have good performance. In full compliance with all manufacturers ‘ recommendations indicated on the packaging mix, you can expect to receive a level surface, resistant to pathogens, chemical and atmospheric corrosion.
Modern gypsum plaster Teplon Eunice is a modern mix that is suitable for finishing walls and ceilings. This material may be distinct coverage options that are appreciated by professional builders. It will not be «steal» free space, which is typical when you choose cement putty. By choosing a mixture of white, you get a long-lasting and durable material for walls and ceilings.
