Drinker for chickens with their hands

Now more and more people at their dachas have been breeding poultry with their hands. This trend is easily explained by several factors. The first and most important one is sustainability. You know exactly where it was grown your chickens and what you feed them. Therefore, the risk to eat low-quality meat is reduced to zero.

The organization of the chicken coop with his hands on the dacha allows each morning to eat fresh eggs. Every farmer knows that they taste completely different from the store.

Moreover, do not forget about the possibility of selling. Landlords of large chicken coops always sell meat and eggs to neighbors, and they happily buy them, because I know where was the produce and in what conditions.

However, to get a quality end product and to minimize their participation in all processes in the chicken coop — all you need to organize. One of the most important elements in this structure is the drinking trough for chickens.

To create waterers for chickens with their hands can use the available in each cottage, things. Although some structures will have to buy a few items that will allow you to quickly and efficiently provide the bird with water.

What must beat waterers for chickens ↑

Requirements ↑

To begin work on the creation of a drinker for chickens with their hands need to study the requirements for this design. We have to admit that chickens are very messy birds. If everything is arranged not reliable, the chicken can jump into the drinking bowl, or even flip it.

When calculating the water rate, which needs to eat chickens, is taken into account a number of factors, including:

• ambient temperature,
• chickens consumed feed,
• the air temperature.

If we take the averages, each chicken should drink about one and a half liters of water per day. Otherwise the chickens could be dehydration.

Chickens to be comfortable to drink water from the troughs, made by your hands, the design must meet the following parameters:

• The ease of use. When you create waterers for chickens with their hands, you should consider the possibility of automatic filling of the tank from the pipeline. This will allow you to minimize the effort necessary to care for the bird.
• Stability. Troughs should be firmly established. If the design tips over, it will not only create more moisture in the coop, but leave the chickens without water. On a hot day it can end very sad.
• Strength. Chickens are not as cute birds as you can think of. Attack these birds can end up very unfortunate for drinking bottles, hand made.
• The purity of the water. Clean water is the guarantee that your Pets will be healthy. In open containers quickly diluted germs. Besides, chickens are not the most clean animals. For them to bathe in the troughs, made by your hands, does not cost anything. In addition, they can contaminate it with their droppings. Isolate capacity waterers, and these problems are not afraid of you.
• Security. This is an extremely important criterion for creating the drinker for chickens with their hands. You have to show maximum attention in this matter. Best quality basic material of construction to choose high-quality plastics. Containers made of metal, may undergo dangerous interactions with medicines and harm the chickens.
• Region. Bumpers in drinking bowls for chickens, hand made, needs to be treated. Otherwise, the bird could get hurt.

Of course, if you want you can still remember a number of requirements that can be put forward to the drinking bowl for chickens, you want to do with their hands. For example, will not prevent to protect from frost. In order to make enough to take a few heating elements and install them under capacity.

What are the types of drinkers ↑

Before you begin to create your desired design with your own hands, consider, what are the waterers for the chickens. It is recognized that during the development of the poultry farmers had invented lots of different designs. Some of them are generally one of a kind. But let’s look at those designs that are most often used when creating modern drinkers:

• nipple,
• vacuum,
• Cup,
• siphon.

Some farmers while creating drinkers for chickens use a simple container for drinking. However, the functional characteristics they are inferior to all other options.

Unfortunately, containers made from cans or buckets, have many disadvantages. First, they need times a day to change the water in the tank gets garbage. Secondly, such structures often remain upright. Sit chicken on top and the water is on the floor.

Good reliability and convenience have siphon drinkers. Moreover, their capacity is more than enough to feed a small brood of chickens. The design consists of the following elements:

• glass,
• pan,
• siphon system.

As you can see, the design is extremely simple. Therefore, it is quite capable to do each person. These waterers can be mounted on legs and hang on the wall. Popular appliances that are installed directly on the floor.

Vacuum drinking trough for chickens that you make with your own hands, on constructional features will be very similar to the siphon.

In order to make the vacuum trough, it is enough to choose the right capacity (in figure 1), suitable Bank 1-1,5 liter, pour clean water (figure № 2) to the brim.

On the neck of the jar should be two small block (figure No. 4). On wedges to put a bowl or deep saucer (figure No. 3) and sharply to turn. The water in the bowl will be replenished automatically, and pouring water from the jar will withstand atmospheric pressure.

The task of automation of water supply can easily handle Cup drinker for chickens. It’s easily done with your hands. Thanks to her, the chickens will always be filled, even without your direct involvement. The design consists of the following elements:

• hose,
• capacity,
• tank.

The water through the hose gets into the bowl directly from the tank. Moreover, it is due to the pressure is lowered, resulting in overlaps supply port.

To achieve automation of all processes in the henhouse with your own hands can be achieved through nipple or Cup waterers for chickens. First now enjoys the greatest popularity among farmers because of its practicality, reliability and ease of installation.

Nipple drinker for chickens can enjoy both adults and Chicks. For boilers and Chicks need to put such structures that open as you like. Speaking of chickens, the laying hens, they are quite normally dealing with pins that move up and down.

Nipple drinker for chickens with their hands ↑

It’s no wonder drinking is considered to be the best of all, but to do it with their own hands will need to spend a lot of time and effort. The simplest option involves a bucket of plastic. And it should have a decent diameter.

In the bottom you need to make four holes. The diameter of each of them shall be nine millimeters. In them subsequently, you will need to twist the nipple with their hands.

The bucket needs to hang on to sufficient for effective operation of the mechanism height. Nipple drinker for chickens easy to clean, but need to fill it manually. But it is not necessary to breathe, the design includes the ability to connect to the water supply. You can also connect to the tank. But you will need to put a lot of effort.

For starters, take care to search for such items as:

1. Square pipe. It should have grooves. The size of the walls fixed 22 x 22 mm.
2. Nipples. You may have to use a lot. Expect, it one meter need 5 dispensers.
3. Microcaecilia drinkers. Alternatively, you can use capreolata. The number of data elements must equal the number of installed you nipples.
4. Adapter square to round pipe. You’ll also need the plug.
5. The hose is flexible enough to be build in difficult places.
6. Nine-millimeter drill bit and tap with a fixed radius of 1/8 DM.

Also you need to take care of two clamps. They will mount the pipe. Their number may be large. The main thing that the pipe is firmly fixed.

Great importance when creating waterers for chickens with their hands has a selection of nipple. The fact that birds of different ages need different nipples. For example, the model 3600 is able to spin 360 degrees. It is ideal for young.

To build a quality nipple drinker for chickens with their hands, follow these steps:

1. For starters, estimate the distance between the nipples. It should be about 25 centimeters.
2. To drill the holes, take a screwdriver. You can also use a drill. Drilling is necessary on the part of the groove. As long as the water didn’t leak.
3. With a tap you need to make the thread holes with their hands.
4. Plug need to close one side of the pipe. Second, you need to put the adapter that will be attached to the hose.
5. Screw the nipple.
6. Connect the inner capsulates. Alternatively, you can use microcalanus the drinker for chickens.
7. Clamps should be mounted on the wall of the house and install the pipe.

The second end of the hose connected to the tank or plumbing. At the end of the construction of the drinker for chickens with their hands need to treat all joints. You can use a special tape.

If you think that you can do without capreolata or you are unable to buy, similar to a drinking bowl for chickens can be made from round pipe, drilled holes for the nipples.

The most important thing is to set the nipple, as the nipple incorrectly installed will not work

Easy drinker with his own hands ^ a

There is a more simple drinker for chickens, which can easily be done by hand. A great example in this context, the vacuum troughs. All you need to create it:

• nipple 1800,
• drill,
• drill 9 mm,
• a bucket or plastic container.

In the lid of the vessel made hole. They are inserted into the nipple, after which the bucket is filled with water. You can assume that the drinker for chickens with their hands, made.

The results ↑

As you can see, to make a device for feeding it under force to everyone. Especially if you focus on the easiest option. Build an automated water supply will take a bit more time, but the result in the form of minimization of the human factor in the process of pet care worth it.

• Carport polycarbonate with their hands
• How to make a tandoor oven out of brick with their hands
• How to make a barbecue with their hands: drawings, step by step instructions