Detailed photo report: high beds from boards
As always, spring has come. She comes every year. Anyway calendar.
We in the country need new beds for vegetables. Why a new one? Last year we made beds out of planks of larch with a thickness of 4 mm and a length of 4 meters. But they turned out so heavy!! Just not lifting! This year I bought another Board, same listak, but with a thickness of 2.5 mm, a length of 4 meters and a height of 18 cm.
Tools ↑
As always, to help us tool: angle grinder, screwdriver, area, bits, meter, pencil and screws
The sides for the beds ↑
Sides for raised beds, I decided to do of the slab. But Croaker is nice, thick. In order to be able next year to plough straight into the beds, making them a width of 60 cm From phalke width of 50 cm
So, make sides for raised beds. I put it on the stool slab
I feel so comfortable to work with, it is possible on earth to do
Measure 60 cm
Apply area
And am straight line
Here you can cut
The husband saw off grinder is exactly the rim
But disk grinders is not enough to saw through the entire thickness of the slab
Therefore, the slab is flipped
The sides for the raised beds ready
The Assembly of the ridge ↑
This is our Board.
The alignment of the boards ↑
Their length is not ideal
On the one hand, align the Board
But on the other hand surplus
The excess sawn off grinder. By the way, the husband does not want to cut with a chain saw. Bulgarian he likes more
Get a smooth Board on all sides
Fasten boards with sidewalls ↑
Put the Board on side
Puts boards
Apply sidewall
And presumptive sidewall
That’s how it all happened
The same is done on the opposite side
Put our design on the side
Put on top of the second Board
And held together by screws
On the second side as well surubim
The patch is almost ready
Fasten the corners of the beds ^ the
Now our bed is necessary to give rigidity. To do this, fasten the corner piece of the Board
Surubim with one hand
Surubim on the other hand
On the second corner as attachable Board
And, of course, screws with the screwdriver
Now, on the second side of the patch attached to the Board, it’s 3 angle turned
The Bulgarian saw off the excess
On the other side do the same thing
4, the fastening of the angle
Also on both sides
And abolghasem surplus boards
One side is ready
With tools go to the other side of the bed, cut from this side
Ridge is ready, stack it to friends
In two hours, so many beds made
Another hour passed, is already 9 beds ready
All! Stop the car! Pot never boil! the beds enough
With all the preparatory works for the manufacture of 11 beds left 7 – 8 hours with a break for lunch. We’re tired. So the rest will do tomorrow morning
The placement of garden beds on the site ↑
On this site we post made yesterday in the garden. Its size is 10.5 x 6 meters
Here’s our mettlesome steed. Brand new. Try to plow for the first time
Bad happened
On a plowed field taken away and put in the garden. Of course, pulled the rope and tried to put our ridge
Between the ridges the distance 55 cm.
Set 9 ridges along the length of the site and two along the ridge of the greenhouse
Make paths between the beds ↑
On the tracks we are sorry for the ground stomp, so shovel threw the earth on the ridge
The track was filled with sawdust with a layer of 10-15 cm
Spared of sawdust, so he bought a dump truck
Sawdust has pretotal and put them on the track of a homemade lattice for convenience
Now and the carrots with the onions planted and closed by covering materials
Here are the high ridges of the boards my husband made with his own hands