Simple stand pot: step-by-step photo instruction book
Summer is coming soon. Not going anywhere – come. And with it will come the time to decorate the suburban area flowers.
This year I decided some flowers to put in vases and beautifully arrange them on a country site.
But the vases do not want to put directly on the ground, and so my husband decided to make them under stand. Photo report of the process quote below
The shape of the pot ↑
Bought in a flower shop, these flower pots. Diameter 40 cm
Material for stand ↑
From the materials available, we only have wire
Fabrication of legs for pot ↑
Make legs for the stand with vise
Decided to make three legs on each stand
While they are different lengths and shapes, but it is all correct.
Align the legs on the vise ↑
Now they are almost the same, little need to prune, but it is possible and so write, this error will not be noticeable
Cut feet in height ^ the
The proposed height of the legs, it will be 40 cm
Provided 5 cm at the bend
Hold the rod in a vise
And bend wire
Oops! The first attempt failed. The rod broke
Try again and this time everything turned out
Something looms
Cut the excess wire ↑
The Bulgarian saw off the excess rod
Managed to photograph a flying wire
Blanks for the legs of the pot ready
The legs are prepared for welding, bent their ends
Prepare a ring stand ↑
Measure the diameter of the pot and look for a wire of suitable length
Do ring ↑
Wire found, now we must figure out what it is possible to bend. This birch stump maybe we prigoditsya
Bend the wire with hemp
It’s not going very smoothly
Even the ring on the vise ↑
But the grips make the circle smoother
Try on the pot
Note the location of the cut
Stand Assembly for pot ↑
Weld joint ring
Try on vase – turned out well
Note the place of welding of the legs
Weld the first leg
And then all the rest
Even is properly
Without trying them all. To try must
Connect the legs with wire, weld it
And again try the pot. Should stand firmly. I hope that will stand the bucket of earth
Painting flowerpot ↑
Paint stand paint for metal in rust. I wanted black stands, although the shop has a wide selection of colors
Summary ↑
These are the stands we did
Left to plant in pots and flowers to photograph
To be continued