The contents
VOLMA-layer is firm, recently appeared on the market, but already proven with the best hand. The most common product is a plaster that is in great demand among consumers. There are different packing of 5 kg, 15 kg, 25 kg and 30 kg. It is very convenient, especially if the material is used for plastering of large amounts or, conversely, small. As a rule, Volu use in areas in which practically no sudden changes in temperature and is always maintained the same percentage of humidity, it is desirable that he was not above normal. Usually Valmai plaster walls, but sometimes used for the ceiling. For Paul, such a plaster is not suitable because of the large load.
The positive side ↑
Consider the pros of gypsum plaster VOLMA-layer, which are not few:
- Easy application. Due to the plasticity of the plaster does not require much effort.
- No shrinkage. Unlike other plaster VOLMA-layer can be directly applied in a layer thickness of max 6 cm.
- There is no need for more putty. Due to its structure, gypsum plaster VOLMA-layer after drying has a glossy surface and does not require finishing putty.
- An environmentally friendly product. VOLMA not uses harmful impurities in the manufacture of its products. Each package is stamped «ECOSTAMP».
- No need for pre-plastered walls. VOLMA-layer can be applied directly on the bare wall, not processing it. The only condition is that the walls must be degreased and metal objects anti-corrosion solution.
- The mixture from the manufacturer VOLMA breathe.
Types of plaster ↑
VOLMA is a constantly developing company. The company cares about their consumers, so
VOLMA has created a line of gypsum plasters, which are easy to use:
- VOLMA-layer – gypsum plaster, as described above.
- VOLMA-Plast – is a dry gypsum plaster, used for manual application. Thanks to these additives, the duration of work with plaster prior to its solidification increases. Great to line the walls or ceilings ahead of the final stage of the work.
- VOLMA-canvas – gypsum plaster mass, in which there is a light astringent component. Used for manual works.
- VOLMA gypsum Aktiv – dry weight, which is used to apply using a special machine, which has high water resistance. Generally, this type of plaster is used for very high quality machine leveling of walls and ceilings prior to Wallpaper paste, paint or veneer before laying tile.
?
?All except VOLMA gypsum Aktiv is suitable for manual use in the home, as it does not require special training.
Composition ↑
The composition of the dry mixtures VOLMA consists of mineral components, chemical elements, light binders. All these components make the work with blends of lightweight and comfortable providing optimum cure time, the practicality and convenience of application and an excellent result, requiring no modifications.
Specifications ↑
More detail is worth looking at the following indicators, which are presented in the table:
| Consumption | 8-9 kg per 1 sq. m |
| The most appropriate layer thickness | 5-30 mm |
| Maximum layer thickness | 6 cm |
| Full drying time | 5-8 days |
| Water consumption | 600-650 ml per 1 kg |
| The temperature of the substrate | +5-+30 |
| Starts to set | After 45-50 minutes |
| Ends to grab | no later than 3-3. 5 hours |
| Compressive strength | at least 3.5 MPa |
| Flexural strength | not less than 1.5 MPa |
As can be seen from the table, while working with a mixture of optimal do 45 minutes. But it is best to use the mixture for 25-30 minutes.
Manual ↑
To dissolve gypsum plaster, use only clean plastic bucket or other container. Diluted in metal containers is not recommended. First added water at the rate of 600-650 ml per 1 kg of the mixture, and then the very plaster. After knead until smooth, using a drill or mixer. If you do not reach desired consistency, add water or gypsum plaster as needed. After kneading a mixture of plaster should infuse for two to three minutes. After 
this time, you can proceed to the application.
The cost ↑
Despite the excellent quality of the plaster, the price is quite affordable for the consumer. So, 1 kg of dry mix costs about 10-12 RUB, in different cities in different ways. To clearly see the cost of plastering, here are the calculations. For example room 4*4 m and ceiling height of 3 meters, then we need (4*3)*4*9(consumption take max)=432 kg we need is approximately 15 bags of 30 kg, therefore the total cost will be (if for a basis to take the cost of one bag of 30 kg 290 RUB is the average price for Rostov-on-don) 4350 RUB.
Of course, if your room is smaller, it costs you too less in material, and Finance.
What mix of select ↑
This question often asked before the repair. A huge selection, but market leaders are the manufacturers and VOLMA, Knauf. Buy the the mixture. Let’s look at the differences.
When you skim coat Knauf Rotman the wall surface turns rough to glue Wallpaper requires additional processing. VOLMA-layer has a smooth glossy surface and does not require additional processing. Most importantly – allow the plaster to dry thoroughly – this takes 4-8 days – and you can safely hang Wallpaper or lay tile.
There are no fundamental differences, since both companies use the raw material from the same gypsum quarries. The difference in the composition of the mixture. So, if gypsum plaster Ramban uses the classic recipe, which affects the drying and ease of operation – Knauf dry longer and work with it a little more difficult – that VOLMA have developed our own recipe. Mixtures VOLMA includes organic harmless chemical compounds, providing a quick drying surface and easy processing.
After applying the plaster with Valmai much easier to work on the final stage – glossing, coating finishing solution, in contrast to Knauf to work harder and longer.
For convenience and clarity, gypsum plaster VOLMA-sloy, we offer you to view the video:
Reviews about plaster VOLMA: ↑
Andrew, 40, Builder
Work with Valmai for a long time. Only positive reviews. Plaster is applied very easily, has long battery life, but on the wall freezes quickly. The term drying is acceptable -5-8 days. From other manufacturers it is much more. Even with a layer of 5 cm, VOLMA perfectly on the wall and rests under the Wallpaper. Recommend for finishing work.
Maria, 35, housewife
Did her husband repairs. Neither he nor I – we are not professionals. On the advice of friends bought VOLMA-sloy. Work was easy, even to us newcomers. Plaster goes on the wall easily, then easily distributed over the wall. And after drying so smooth that we did not even treating the wall with something else and immediately hung Wallpaper. No bumps, no hollows, Wallpapers nowhere bristling not far behind. Thanks to my friends that advised us Volu!
If you have tried a mixture from the manufacturer VOLMA, leave your feedback in the comments to the article.
