Especially the installation of a fence of corrugated Board with your hands
The fence suburban area, construction of the fence – one of the first tasks in the list that need to be addressed to the cottagers, taking up the arrangement of your site. To hide the area from prying eyes, you can make a practical fence of corrugated Board with your hands. In this article we will discuss how to build this fence, to pay close attention to the various nuances and secrets of the installation.
The contents
Why corrugated sheet?
A fence made of this material can be quickly set – is determined by the desired line along the perimeter, installing posts, cross struts and then attach trapezoidal sheet. Behind this fence the owners feel comfortable – it protects from prying eyes, being quite strong.
A fence made of metal profile, you can do high. At a height of 3-5 m to look beyond the fence will be impossible. Such a fence will also muffle sounds coming from outside, to create a sound-reflecting screen, for sounds produced at the site.
The fence of corrugated steel sheeting — a feasible task that can be solved without the involvement of experts and additional expenses for their work or construction equipment, as required, for example, when installing concrete fence. We must acquire the necessary tools and have the skill to operate the steel sheet. Sheet good that comes in various colours. You can choose the color according to your taste and make neat beautiful fence. Moreover, this fence will last you a long time – the galvanized sheet metal has a lifetime of up to 20 years, and is polymer coated and will last much longer.
The color of the fence can go well with the decoration of the house, to enliven the landscape. A fence made of profiled sheet is not dull and featureless building, even in its simplest version, it is pleasing to the eye
When buying steel sheets be sure to note the price here is not worth saving. The low price means the same quality – bad quality of hire, a polymer layer, galvanized or too thin metal, which is not good for a fence.
When you select the sheet, do not pursue cheap, the fence is being built not for one year. C8 corrugated sheet suitable for roofing and for the construction of the fence
For mounting the fence of corrugated steel sheeting you will need the following materials:
- corrugated pipe for supporting pillars and pipes for the lag.
- gravel + cement + sand;
- rope, primer, level;
- welding machine + capacity for cement mortar;
- drill + drill bit;
- riveter + rivets or metal screws.
The pillars can also be used asbestos or wood. If you opted for wooden pillars, treat them with antiseptic before beginning work. The part that will be deep inside, needs to be particularly durable – it can be treated with a blowtorch, and then bitumen primer.
Step-by-step analysis of the stages of construction
Stage #1 — partition fences
The first step is to make an exact layout to determine where there will be gate, gate, map out locations for posts. The pillars are set at a distance of not more than three meters from each other. Determine the desired height of the fence around the perimeter to calculate the amount of the desired material.
Step #2 — installation of supporting pillars
It may be tubes with a square (not less than 50/50 mm) or circular cross-section (not less than 76 mm). The upper hole can be brewed not to get wet.
The scheme of installation of the supports for a fence of corrugated Board. As supports used a metal pipe to the bottom of the pits can fill or crushed stone to make a sand pillow. The installation of two lags.
Next you need to dig holes for posts to a depth of 1-1. 5 m, width 150 mm. you Can use manual drill. The depth of the underground part of support depends on the height of the fence, the higher the planned fence – the deeper need of support dig in.
The scheme of installation of a fence of corrugated Board in three logs. As the supporting pillars and the Arab League used shaped tubes
Posts should be well fortified, because this fence is exposed to the force of the wind. When poor strengthening of the supports of the fence, a large area which is exposed to wind, may partially capsize. The bottom holes for pillars srednerossijskim filled with gravel (layer of about 150-200 mm), then set the post, poured cement.
Please note! For installation of poles you need to use the plumb-line, they must be installed vertically. For good fixation of the supports can be strengthened, privaris two sides of the metal bars and zaglubit them in the ground. After the supports are filled with a solution, they need to leave for three days for complete curing of the concrete.
When the Foundation hardens, proceed to install the Lage steel cross-section is mounted for attaching trapezoidal sheet. For a lag fit of the profiled pipe (section 40/25 mm). The amount of lag in each section depends on the height of the fence. At a height of 1.7 m is enough to have two of the Arab League, at a height of 1.7 – 2 m and above need to install the three lag – top, bottom and in the middle. The upper and lower joists are set at a distance of 4 cm from the top and from the edge of the earth. Welding for attaching them is the most reliable method of fixing. To protect from rust joists and pillars after installation covered with a special primer. It is better to do it at this stage, as after the installation of the sheets to work with the primer too.
Article topic: Setting poles for the fence: ways of assembling different designs
The installation of a fence depends on the type of soil. If the soil is soft, its parts, especially in the spring, can SAG, it will happen and with pillars set in such soil. In soft ground it is better to install poles to build a strip Foundation. He constructed along the pillars on the bottom is a ribbon box. The height of the box is approximately 20 cm, that it was solid, boards are held together by rods or wire. Then laid along the walls of the structure a layer of waterproofing, fill with concrete. Even if the soil near the supports will be blurred, strip foundations will give strength and stability to the fence.
Erected strip Foundation for fence made of profiled sheet, installed in soft ground. The box is fixed between the bars after pouring the cement will be very durable and reliable design for such a fence can not be afraid
Step #3 — install decking on the joists
For fixing use metal screws (length 35 mm, pitch 500 mm). Joining of sheets of corrugated sheet between them is overlapping.
Tip! When mounting the fence of corrugated Board use work gloves – sheet metal is sharp enough material, there is a risk of injury.
As the saying goes, better to see once than hear a hundred times. Offer you to view a video example of installation:
Article topic: Installation of a gate to a fence of corrugated Board: analysis of the peculiarities of the technology of installation
A fence made of corrugated sheet looks good, it durable and practical material easily tolerate adverse weather conditions, sudden temperature changes, extreme heat and cold. So don’t treat this decision as interim. If posts that don’t look particularly aesthetically pleasing, brick brick or stone (or use a colored sheet), the fence will look expensive and beautiful.
Alternatively, the supports can be lined with artificial or natural stone or brick — this fence looks a lot more impressive and is much more durable. But of course, this will require considerable additional cost
The corrugated sheet is well combined with other materials, for example, forging. In this embodiment, the fence of corrugated sheet covers the upper part of the fence, you can close only the bottom or use the sheets with an interval between them to create an original, attractive fence
When you install a fence of corrugated Board is almost inevitable scratching of the sheets. They can be easily eliminated using the spray paint. Better to buy a couple of cans of paint of the right color. Outside the fence looks like a solid wall, without seams, durable and securely hiding the yard from prying eyes.
Various options for fences of corrugated Board, demonstrate the aesthetics of this material, its good compatibility with stone and brick. It is enough to show a little imagination, to create not only practical, but also beautiful fence
Additional costs for the maintenance of such a fence is not required, can not be said about the fence made of wood, and this is another plus in favor of the installation of a fence made of profiled sheet.