The contents
- The distribution of the upper space
- The distribution of the middle of the space
- The distribution of the lower part
Before proceeding to the choice of wardrobe must be pre-determined so, what components should be in its filling. This has become a popular and frequently used precisely because there is a possibility to choose the model that corresponds to the personal preference of the consumer. From being so right in wardrobes located components and various accessories, depends on the filling of the wardrobe and its capacity.
In the process of selecting components for the wardrobe need to start from how it will be operated wardrobe. If you compare the Cabinet used for installation in the bedroom and in the hallway between them is a very big difference.
Efficient use of space ^ the
To allocate the internal space needed most thoughtful. You need to consider the location of shelves in the closet, drawers, a place for hangers and shelves for additional storage of seasonal clothes, footwear, accessories, Shoe care products, clothing, Department, sports, and many more additional pockets.
Much important not only to allocate the space, but also to determine what design should be shelves, which pull-out mechanisms equipped. For example, you can choose boxes with the usual handles or special clearances through which you can nominate and put the boxes in place.
If we consider the free space in General, it can be divided into three main parts – tiers.
The distribution of the upper space ↑
The upper tier is mostly used for storing things that are rarely used. This is due to the fact that things in this part of the wardrobe is not very convenient to get. Often in the top tier is stored seasonal clothes, shoes or bags. In the case where there is a need to store things on the rack, it is possible to equip the upper tier of the hanger – arm.
The distribution of the middle part of the space ↑
As practice shows, the correct way is to equip the mid level wardrobe shelf and rod for clothes. Shelves for closets are made on the basis of DSP. This files most often between the shelves can be completely different space. The size of this space is determined by what kind of clothes are to be stored. Regarding the placement of the rods is to say that their location is inside is directly dependent on depth values.
If the Cabinet is deep, the rods are parallel to the door, and if not deep, respectively, perpendicular. In view of the fact that this part of the Cabinet is the most convenient to use, it is customary to store things you need for daily use. For these things provides drawers or baskets. On the side walls of the closet might be hooks to hang bags.
The distribution of the lower part ↑
Basically, the lower part of the wardrobe designed for the Shoe shelves. There are different sections or shelves. It is possible to allocate additional free space to store the Ironing Board and iron.
Options for filling the wardrobes for the bedroom ↑
The wardrobe, designed for installation in a sleeping room is used very differently in contrast to installed in hallway. There is no need to allocate space for storage of shoes, hats and outerwear. Most often these cabinets are made to store linen, clothes, underwear, and similar products. The optimal width is considered the width is 60 centimeters. When you consider the thickness of the rear wall and doors, the useful volume is 50 centimeters. In the middle of the provided components in the form of a rod with hangers and drawers with various sliding mechanisms.
Distinguish the main parts list are included with components for the wardrobe in the bedroom:
- rod – pantograph. Comes complete with mechanism which is actuated by the handle. The rod is lowered to a convenient height;
- basket mesh and shelves for linen storage. These divisions are very convenient for storage of small and medium size. The material is metal or plastic;
- a device for placing hangers, end, or normal type;
- hanger for clothes with hooks. Ideal for storing things crease-resistant;
- special holders retractable type for placement of the trousers;
- hangers for placement of ties and suspenders, and belts;
- the basket is equipped with a retractable mechanisms with a multi-level structure;
- special mounting on the wall, for storage iron. Depending on the basic components and size it can be built-in Ironing Board, which, if necessary, to move, and then folds up and takes up almost no free space.
Key features closets installed in hallway ↑
Wardrobes in the hall room are chosen depending on its size. If the room dimensions allow, it is possible to choose a model with a depth of about 60 centimeters, but if the room is small, the best option would be to buy a Cabinet depth of only 40 cm. Wardrobes with a small depth have mechanical type of rod. It is clear that there is no way to hang too many hangers with things, but for a small family this inside filling of the wardrobe is enough.
It is important to thoroughly inspect all drawers and shuhlyada. They must be fixed so that during their advance they faced and rested with the frame of doors.
Very popular to choose the model in the middle part of which is storage space for hats, bags, umbrellas and so on.
It is good to choose the model, the facade of which has a mirror on the entire length of the door. This will help to solve problems with a mirror, because in the hall it must be. Depending on the interior of the room and the type of illumination, you can choose the model of the Cabinet, on the facade of which is mounted a chiseled lamps.
Components of the wardrobe for children’s room ^ the
The children’s room is the place where everything must be as safely. This also applies to filling the wardrobe. When designing Cabinet you need to carefully select components for its content.
The upper part, until the child grew up, reserved for use by adults. The lower part is equipped with a so here is all things baby. Eventually, when the child gets a little older, he will be able to use the other side of the Cabinet.
The child could make an effort to shelves and other accessories, you must opt for those models that are very high quality.
Wardrobe angular type ↑
Closets custom size and shape are used to embed in those areas where there is no possibility to establish a common model Cabinet.
To choose components for such a wardrobe is not easy because the shape is unusual, but, nevertheless, the main challenge is to be able to get any thing easily. Mainly in the Central part of corner wardrobe set the bar for placing hangers.
The basic properties of sliding door wardrobes built-in type ↑
If you expect all the work to create a wardrobe to perform with his own hands, internal components can be choosing the most practical. There is the possibility of using all available departments, starting from the bottom and finishing the top. Is completely different the use of interior space. Depending on the parameters and the type of room you can organize a Desk, who quickly hides behind the door.
You can also have a large wardrobe sliding wardrobe with different shelves and sections. Furthermore, due to capacity there is a possibility of neatly folded things that take up space in the pantry.
Conclusion ↑
The furniture is bought for a long period of operation, because not everyone has the opportunity to replace the furniture every year. In view of this, we need to make every effort to internal content consistent with all existing requirements. Due to the huge number of models, you can choose a suitable option for both home and office use.
How best to plan for the internal filling of wardrobe find out in the next video
