• 30/04/2022
• Categories: Wall

Insulation of walls with their hands

Mournful screaming babies, drunken chants or March desire the neighbor’s cat preventing you to live in peace? Or Vice versa – aunt Lucy from a neighboring apartment can hear you planning a family budget? There is a solution – insulation of the apartment! This process is nothing complicated and easily done with your hands. There are several technologies that use different materials, but the result remains the same – the penetration of sound through walls is minimized. And how to make sound insulation of the walls qualitatively, we will consider in our article.

If your house has a garage which often hosts gatherings in a noisy group, or regularly optimized car, it is also worth considering on sound insulation in the apartment or house. The need arises and when building the rehearsal studios. The correct material can help you quickly resolve the issue.

Than to make a noise isolation with their hands ↑

To sound-absorbing and sound insulation materials must meet the General requirements, the implementation of which required. Otherwise, the quality of sound will not:

• Stable technical and acoustic characteristics that do not change throughout life;
• Moisture resistance and resistant to mold and fungi;
• Ecological purity of the material. The release of harmful compounds can have a detrimental effect on health.

One of the most practical and affordable materials for the arrangement of noise reduction is considered mineral wool. The unique structure of the fibers reduces the penetration of noise, does not cause allergies and is not exposed to fire. Besides, mineral wool ensures significant saving of heat, which is important when building a garage.

To date, there are other ergonomic materials. Innovative ZIPS panel allow simultaneous insulation of the walls and finishing in the apartment. They consist of a layer of mineral wool, glued on top of it with drywall. They are much more expensive.

If you plan to trim Wallpaper does not require a lot noise threshold, you can use the sound absorbing patching for Wallpaper. It is sold in rolls and is easily installed. This soundproofing reduces noise by 21 dB.

Preparatory work before soundproofing ↑

It would be foolish to equip a sound-absorbing layer and take care of pre-restoration surface. If the walls noticed chips and cracks it is necessary to treat the starting plasters. It is better to reinforce problem areas with a grid. After drying it is necessary to hold the finish the alignment. It will prevent the appearance of the space between the profile and wall.

The frame Assembly is performed by special technology and different from the usual arrangement under the drywall. To obtain high-quality protection is not necessary to mount the profile on the wall. Better to retreat from it by 2 cm and run a strip of rubber or cork. Vibration isolation will reduce the possibility of penetration of sounds. After the construction of the frame starts the most important stage – working with sound-absorbing materials. And if at this stage to prevent stupid mistakes, the sound insulation of the apartment you will be provided at the highest level.

Soundproofing walls: laying sound-absorbing material ↑

Bookmark mineral wool and installation of panels does not cause difficulties. In the case of soft materials it is necessary to perform a thorough stuffing. The denser the wool is stacked, the better the soundproofing. It is very important to fill all the cracks, especially those near the profiles. Their cavity is also recommended tightly compacted wool. This will reduce sonority. If after the installation left a gap, you can fill them with foam.

Installing ZIPS-panels is a slightly different way. Around the perimeter of the Foundation is laid ribbon of glass, and joints of the material being worked sealant. To consolidate apply silicone fibrously.

Despite the widespread positive opinion on drywall sound insulation of the walls, the sheets do not provide adequate barriers. An empty box that is not filled absorbing materials, can produce the opposite effect. Drywall is always used to cover the frame and serves as the basis for subsequent finishing.

Decorative soundproofing ↑

Improvement of sound insulation of the walls has one nice touch – the drywall is very simple to decorate. Smooth base perfect for any decorative layer. First we need to make reinforcement of joints and alignment of the finish plaster.

You can then perform coating with decorative tinted plaster, just paint a smooth surface or to Wallpaper base Wallpaper. Drywall is excellent for finishing of decorative stone, which will be relevant in the hallway.

The secrets of quality sound insulation walls ↑

The main secrets of quality sound insulation become the full observance of technological process. Care at the stage of preparation, the proper installation of the frame, thorough filling of all spaces, material and all – audibility is limited.

When working do not forget about the outlets and the ventilation, which have also become a source of noise and if they will emanate strong svcu, no modern insulation will not help. To reduce the working process is possible with the use of rolled insulators, which are just glued on the wall. But such technology cost several times more expensive.

A responsible approach to the execution of works, the use of proven materials and compliance with the manufacturer’s recommendations will allow you to completely get rid of the annoying sounds in the apartment.

We wish you high-quality sound insulation of the walls, and noisy neighbors were nedokuchaev.

• Installation of plasterboard partitions with their hands
• Vapor barrier walls of their hands
• Interior walls at the dacha with his hands