Decorative plaster Baldini
The contents
10 years ago decorative plaster were luxury finishing material, which could afford only wealthy people, but over time it became available to all and its range is constantly expanding. In an example, the company Baldini, creating invoices for different interiors (from modern to classic).
The main purpose of Italian decorative plaster – the formation of the coating, requiring no additional work on its decoration, for example, painting.
The components of Baldini are:
- Binder materials, gypsum, Portland cement or lime;
- Liquid potash glass;
- White cement;
- Additives in polymer and epoxy resins, silicones polyurethanes with plasticizers and dyes.
Plaster Baldini boasts a great warranty period of operation – 10 years, what can be said about conventional «draft» the materials for finishing the interior walls.
The benefits ↑
- Tinting in any color and hue using cantometrics system Baldini Tecnocolor Edilizia. Color happens colormap. It is about 1000 colors;
- Monocomponent decorative plaster Baldini – finish, which do not need to add more mixture to make it ready to use. The caring one – opened-and-play;
- Different gloss level: matte and glossy.
- Water vapour barrier. Thanks to silicone and epoxy additives, decorative plaster delays steam on the surface that prevents the formation of mold and reproduction of pathogens;
- The antiseptic properties. This allows you to skip the process of impregnation of the wall antifungals.
Types of decorative plasters Baldini ↑
Due to the wide variety of textures, the Builder, the finisher can create a variety of decors interior even in the bathroom.
Othello ↑
Translucent plaster Baldini velvety-glossy view is composed of acrylic. Thanks to obtain saturated and dark colors depending on the application technique. For saturation of the surface a glossy light, it is recommended to use a special wax Shine. The feature of this decorative plaster – the possibility of rendering in dark colors.
Prepare new solid surfaces does not require the application of antiseptic impregnation, just the use of a primer of deep penetration, but the wall with the defects or a surface with a high absorb ability to be peeled, alignment and colour treatment.
The application is carried out using a metal plastering trowel in several thin layers. The recommended period of drying between layers is 1 day. After finishing, the surface is grinded with fine abrasive paper.
Specifications: pasty plaster has a density in the figure 1,550/1,650 kg/l, which allows a perfect finish on previously prepared surfaces. The consumption at a layer thickness of 0.4 – 0.8 cm is 3 l/m2.
In the case of an unwanted drying of the paste Othello, the composition is diluted with water.
Mediterraneo ↑
Decorative plaster is composed of natural fillers and fibers. They form a unique pattern for the walls. Mediterraneo feature is use for relief panels.
Advantageous features of decorative plaster Baldini:
- Strength;
- Water vapor permeability;
- Ease of care.
Before applying you must properly prepare the wall surface to remove all defects, dust off, primed. Not recommended the application of plaster on the walls, covered with a film-forming composition, for example, emulsion paint.
Method of application different in comparison with the previous type of plaster from Baldini. In this case, use a metal putty or a small grater, for example, for Korean carrot. The tool overlaps with the desired amount of plaster and due to various movements of the tool creates a textured pattern. After drying, apply glazing compound (Velatura, Capris Satinato). It is applied with a brush and spread the sponge trowel for plaster.
Density 1.6 kg/l allows you to quickly apply the plaster with a rate of 1– 2.5 kg/mTwo at a layer thickness of up to 0.1 cm the Application of subsequent layers is recommended in 12-24 hours, depending on the room temperature.
Decorative paste-like mixture can be used for interior and exterior surfaces. When solidification is diluted with water.
Ruralis ↑
Decorative plaster Baldini Ruralis texture work is a paste, which included slaked lime has antibacterial properties. Due to its structure and density (1,500/1,600 kg/l) it is easy to restore the old surface. That is why it is used for both internal and facade works.
After applying the plaster reminiscent of the decoration in the Provencal style. Can be tinted to any color and shade that exist in the colormap of the brand.
Prepare new and old surfaces prior to application of plaster is required, thus must pre-clear covered with different paints and polishes the surface, and there are also restrictions on weather conditions: high humidity, wind, direct sunlight.
Applied plastic mass of any metal tool, the effect of Provence, is created by coating blue.
Consumption of plaster – 2-2,5 kg/mTwo when the thickness of the overlay layer 1, 5 mm., According to necessity, diluted with water.
Marmofloat ↑
The basis of this plaster – limestone. To simulate natural stone in the composition of the added marble chips. Thanks to these constituent elements, decorative plaster after the application is vapor permeable and has disinfectant properties.
The main color is white with patches. Allowed tinting. Be used for internal and facade finishing works.
When applying paste using a trowel stainless steel. It is recommended to apply two layers with a thickness of 0.8 cm, with a frequency of applying the day. If you wish to give an additional luster of surface, the last layer is superimposed at an angle of 45 degrees.
Approximate consumption of pasta – about 2 kg/mTwo. Used for finishing internal and external walls.
Particularly glossy and Intruzia Specchio ↑
The basis of artistic plasters with acrylic to achieve a mirror effect surface. Intruzia and Specchio, thanks to a transparent structure, they are tinted in bright pastel colors, saturated (first grade) and not too saturated colors (second grade).
New walls can not be treated before applying the plaster, but the defects of the old should be removed and covered with primer. Wooden surface requires pre-finishing putty wood 1-2 layers.
Pastes are characterized by high density (1,810/1900 kg/l), but despite this, their consumption will not exceed 1 kg/mTwo provided finishing layer of 0.04 mm. Complete drying occurs after 8 hours, but the next layer is recommended nakladyvat 24 hours.
Ciclope ↑
Decorative plaster textured tie has a high indicator of the degree of water vapor permeability due to the porosity of the structure. The advantage is the ability to hide defects, as well as the play of color natural stone.
White decorative paste coated with special paint that is pre-tinted to the desired color. Surface old or new walls before decoration is always prepared: to clean from dust, primed. If you have previously applied paint, it is carefully removed.
The toothpaste consumption per 1 mTwo the layer thickness of 0,04–0,08 mm up to 3 kg. Complete drying and re-coating occurs after 24 hours.
Conclusion ↑
Using to create your interior any decorative plaster, Baldini, will be more than 10 years to delight flat or three-dimensional murals in rooms or to enjoy the brightness and individuality to the facade of his house. An illustrative video-on plaster can be seen below.