The contents
You still thinking over what kind of dressing to choose for your home? In fact, the options are really a lot and each of them is good in its own way. One of the budget options in terms of price-quality is coat. If we talk about construction, everyone knows that this is not an item of clothing, and the technology of applying the plaster. This technique can be called the most famous. They decorated the facades of the houses our parents still in the Soviet Union. Such constructions can be found today. Usually is the gray walls, which do not differ in attractiveness. Decorative plaster coat is done ordinary plaster, using the basic set of tools.
The application can make even a layman, because a complex process can not be named. You will be given different pictures and videos. There are many ways by which you can make a fur coat. We will look at each of them.
Select material ↑
To accomplish such a finish is possible to use different compositions depending on where they will be working on drawing fur. When your goal is to make the facade of the construction, such work will be ideal cement mortar. It is possible to cook by yourself. If you plan to elevate the wall inside, then use a special dry mix in buckets.
She is ready and all the necessary components are present there. All that remains to do is to cook it, adding water and stirring.
Determine what you do decorative plaster, you can move on to the next stage.
Tools and materials ↑
Applying coats is impossible without the right tool. It should be noted that some professional and complicated tools are not required. Here is all you need:
- the container for mortar (bucket, basin) and a mixer;
- construction structural roller;
- tinting paint;
- a fine-grained emery paper;
- rule, trowel, spatulas of different sizes;
- a brush with soft bristles and plaque;
- a broom and a stick.
It’s pretty simple and banal. To get such tools will not be problematic. You are now ready to proceed to the execution of works. Let’s look at 6 ways that you can make the application of decorative plaster technology «coat».
Method of applying coats No. 1 ↑
We are considering each method has its pros and cons. The most simple and do not require special skills, is the method of applying the plaster with a broom and a stick. All that is required to operate the solution, an ordinary broom and a stick.
The process of plaster the following:
- To start, knead the necessary quantity of ready mix.
- Then dip the broom into the solution to scoop the required amount of the mixture.
- Now, holding the stick parallel to the wall, hit the broom on it, and the solution sprayed on the wall.
- All done until, until the surface is fully covered.
Application coats a broom – fashioned method. It has its drawbacks. For example, the method is suitable only for use with a small area (stairs, a small part of the wall). After the processing of the whole house will take a lot of time. The essence boils down to evenly coat the surface.
How is decorative plaster coat with a broom, you can see from the video.
Method of applying coat number 2 ↑
For this method, which can also be called «antiquated», you will need a brush and a Board. Nowadays it is almost never used, but miss it we are unable. They can handle small areas like the outside and the inside. Of difficulties you should arise.
You want to dip the brush into the solution, turn pile up and spend on them with the plate of the movement itself. In the end you will achieve a similar result as using a broom. The spray plaster will fall on the wall, coating it evenly.
Method of applying coat number 3 ↑
Now consider in more modern ways, which is not too hard to do. But to bring everything to life to take much less time. Yes, and the cultivated area increases significantly. You will need building a textured roller and a rule, and spatula.
First the surface is cleaned, leveled and coated with primer. Then apply a thin layer of plaster with a spatula on the wall and align all the rule. Do not wait until the mixture dries, and is in its raw state, take the roller and slide it across the surface. Work gradually, without missing sections of the wall. When the forward movement of the cushion up or down on the surface to form the desired structure. The photo shows how the wizard does this work.
If you treat the walls of decorative plaster inside the house, the surface after drying is required to process, removing scratching the ridges. To do this, use fine sandpaper, polishing the resulting texture.
Method of applying coats No. 4 ↑
Most high-tech way you can call the coating solution by a compressor. Only here for this to work you will need this unit. You can rent or borrow from friends. Working with him, you will see how fast you can cope with this task especially if you want to process a large area. The layer will be uniform, and the pattern is smooth and rounded. A small video will help you understand the working principle of.
The application of decorative plaster coat ↑
On the market you can find special mixture, which, after processing of surface simulates fur. It is suitable for those who want to perform high-quality decorative finishing of internal walls. Decorative plaster coat has several advantages:
- environmentally friendly;
- easy to operate;
- strength and plasticity;
- resistance to washing;
- durability, operation life up to 20 years.
As a finishing, decorative coat will elevate your home. View photos of decorative plaster coat to appreciate it.
Preparatory work ↑
For starters, you want to bring the surface to mind. The wall must be smooth, all differences are smoothed starting plaster layer. Setai remove all dirt and dust. To decorative fur coat is well kept, treat the wall with primer deep penetration. 12 hours later, when it dries, you can proceed to the formation of.
Preparation of plaster ↑
So, let’s get to work. The first thing you need to prepare a solution. To do this, take a bucket, fill it with water, according to package instructions, and pour back dry mixture. Stir the contents thoroughly, leaving no lumps. Now let the plaster be reached in 10-15 minutes. Then again stir it. And in order to get a colored plaster, just add to the mix tinting paint desired color. All ready for work.
The application of decorative plaster ↑
Immediately prepare your spatula and trowel Venetian. They should apply plaster.
- Spatula type a mixture of Venetian trowel.
- Solid evenly apply it across the surface, bottom-up.
- The thickness of plaster must match the diameter of the crumbs.
- The whole process is repeated until then, until the working surface is fully covered.
- After drying, Polish the surface with fine sandpaper.
If you have worked with colorless plaster, then it can be painted with water-dispersion paints in any color. So to get the same color across the surface. Because when you add paint to the solution, it is possible not to guess the shade.
It remains to wait for paint drying. As you can see, nothing complicated. But the end result can not but rejoice. This structural plaster will make the room more attractive, but due to a variety of color coating it is possible to realize any design ideas.
Further application of decorative plaster coat you will see from the video.
