How to insulate Windows on the Swedish technology independently

Warm house – a pledge of comfort and convenience. In addition to the insulation of walls, floor and ceiling, it is important to insulate the Windows. There are many methods of insulating the Windows with their hands, but the best quality and most popular is Swedish technology.

This method is ideal for old wooden Windows and new frames, regardless of the method of coating and window construction.

The essence of the technology lies in the special mounting of the tubular gasket. This method will require a lot of effort and a certain level of skill and tools. However, all the energy spent on work will pay off, by saving time and money. As they say, the avaricious pays twice.

The cost of insulation on Swedish technology ↑

Installation costs sometimes exceed the cost of new frames. However, this disadvantage kompensiruet quality of operation and its duration. Insulated Windows will last the owner for at least 10 years. This is due to the expensive materials used in the insulation and unique technology.

This method was developed by Swedish engineers and can significantly reduce the cost of heating even in harsh climatic conditions.

To insulate this way can be as plastic Windows and wooden Windows. For insulation of wooden Windows on this technology get the effect of a sealed insulating glass unit, the same high-quality new plastic Windows.

In the case of plastic glazing the insulation occur if the Windows have poor design or have suffered mechanical damage.

The benefits of Swedish insulation technology ↑

If you decide to insulate the Windows with their hands, then this is done with minimal investment funds. The main value necessary for installation. In order to start work on the insulation of Windows, it is necessary to study in detail the algorithm of installation. We bring you the video:

Only by purchasing the necessary knowledge and skills to begin work as the technology itself has a lot of difficulties. So, what is the benefits of Swedish technology:

• full sealing frame and the window opening;
• high level of noise reduction;
• minimum penetration of dust and dirt in the room;
• saving money and energy. Making insulation this way, you eliminate the cost of annual processing RAM or buying a new window;
• environmentally friendly – the material of the cord contains no toxic substances, and during operation it does not emit tar and other compounds;
• durability, tubular seal made of special material based on rubber and silicone, which in addition to its functional features do not adversely impact the environment.

As a result of insulation of Windows with this method, you will receive protection from drafts and save heat, and a quality sealant will last you for years and will retain aesthetic appearance, in contrast to the ordinary gasket, which over time changes color, gets contaminated and comes unstuck.

Swedish technology insulation window ↑

Technology at first glance is not complicated, but clear the items of the algorithm. Thus, the core material is a tubular strip of gasket with a characteristic stripe. It is made of a unique material that is not exposed to natural conditions, chemicals, dirt and temperature changes. The life of the heater, under warranty производителя15-20 years.

Stage # 1. Analysis of the condition of the window frames and repair costs ↑

First, the window, if it is old, should be evaluated for safety. The main condition – the window must be an integer. In the presence of rotten areas, splits and large cracks, it is recommended to replace the damaged areas.

The algorithm of diagnostics of a status window:

• visually inspect the external condition of the frame;

• if damage is found, the tree should be treated with putty and apply a coat of paint – this will stop the rot and strengthen the structure;
• inspect the hinges: they should not SAG, and have good design. If the loop is faulty they must be replaced;
• check whether tightly closed Windows. Are there any gaps or distortions.
• Check the condition of the glass, if there are cracks and chips, then we change them for new.
• Check the quality of the hardware: latches, locks. To achieve complete sealing, the window should close easily and tightly.

If the window does not have defects or they are fixed, we can proceed to the next stage.

Stage 2. Sealing of glass ↑

Performed measurements of the window and calculate the necessary area of the seal. Then proceed to check the window location and the quality of the clamp. Eliminate the gap between the glass and the frame. For this you need to remove the glass and treat the joints with sealant. Then mount them back and fix shtapikami. Sealing joint between the glass will amplify the effect of warming.

Stage # 3.Markings ↑

The perimeter frames do the layout for slot. For this we use the level line to be smooth it is necessary to consider that the seal should not zalamyvaniya and nail folds.

After marking begin to cut grooves.

This process is carried out using the special tool – cutter. For installation you need to remove the sash Windows and to produce work on the table is a much easier process.

The groove angle should be 45 degrees. Before installation of tube sealer is necessary to clean the surface of the window and the groove from shavings and sawdust.

Stage # 4. Installation ↑

The mounting cord is the method of pressing is essential technology. It is performed using special tools – roller. Using the roller seal is pressed into the groove.

Features material ↑

When buying sealer you need to carefully examine its quality and performance properties, and also to pay attention to the manufacturer. Not always the cord, are presented on the shelves of hardware stores, is original. Usually poor quality fakes will last you a maximum of 1-2 years, thus creating problems during operation.

The original material is not deformed and retains its appearance and «working» properties for several years, not exposed to critical temperatures and their fluctuations.

The seal is available in several forms, depending on the size, diameter 5-6-7-8-10-12 see For each case you can choose the best option.

Tips ↑

Swedish technology for the insulation of Windows has its own quirks and secrets. We would like to introduce you to some of them:

• staining or varnishing window frames, insulated with this technology is made only after completion of the work. Otherwise, there is a risk of damaging the surface. It is recommended to paint the surface, without touching the heater;
• some designs of window frames such as the frame in «Stalin», you need to insulate the inside only, this oblige design features – separate cover;
• for works on warming in addition to the standard set of carpenter’s tools, required special tools: roller for pressing sealer, a special cutter for cutting grooves;
• window panes on the Swedish technology allows to achieve high parameters of thermal insulation of premises, saving considerable budget on heating and buying new expensive glass. And the durability and quality of operation will save you from annual expenses by the insulation structures by traditional methods.

• How to insulate wooden Windows
• How to insulate wooden Windows with their hands
• House framing bath with his hands