Homemade air conditioner with your own hands

Air conditioning is the one system that allows you to provide support in building the best temperature and to eliminate the malicious content of the particles in the air. You can consider a number of options, which are considered a great alternative to the expensive device for refreshing effect in stuffy rooms.

Fan and water for a homemade air conditioning ↑

A very effective method during the lack of air conditioning was considered the use of wettish towel. They, in particular, obvorachivany bottle, after which she exhibited in the place with a draught, where in the course of the water evaporation cooled the room.

The main components for such air conditioning systems are:

  • a simple fan;
  • capacity that is filled with water, a towel;
  • retaining wire;
  • housing that is suitable for this.

This homemade conditioner can be done even in the office. It is placed in the window of the window. It works on the following principle. The fan forms vostokovedenie where the wire hanging towel, which partial image is omitted in the fluid tank. To regulate the air flow can be equipped with such a structure a certain filter in place of the air intake.

And if you carry out embedding of the high-speed mode, during which switches the fan and light bulb filament, it is possible to achieve the effect of mounting various temperatures, and in an hour the cost of fluid will be approximately 1 liter. Not to mention that this homemade air conditioner works almost silently and to do it and everyone can their hands.

The conditioning of plastic bottles ↑

For this design you will need:

  • plastic bottles;
  • plain water;
  • fan.

Optimal results can be achieved when the tank is filled with a liquid will turn into ice by putting add on some time in the fridge. It is quite important how the bottles are placed. They are placed in front of the fan, which takes the / o panel is represented in the series through small gaps. Water in makeshift tanks from time to time it is desirable to update.

Homemade air hose and copper piping ↑

To do this-we need:

  • a simple rubber-garden hose;
  • sufficiently thin copper tube;
  • fan.

From the tube is a radiator on the surface of the fan grid, leaving intervals for the airflow which is then securely clamped in place. One side of the tube connects to the faucet and the other goes to the drain. After turning on the faucet with cool water and a fan, is / o panel is represented the desired coolness.

The refrigeration chamber in the form of conditioning ↑

If somewhere at home lying around outdated freezer, it may well serve as a fan to refresh the air in the structure. For this purpose the cooling chamber is placed in the window opening, at the same time isolating all the cracks and holes. And the reverse side out. After all, there is a radiator, emitting heat.

Because when the freezer all the cold accumulates in the interior, you need to build a simple fan to the cold air was blown. You also need to drill some holes on the side for them was going to warm the air. Such a system also ensures cool freshness in the hot time of the year.

Radiator car device ↑

Homemade air-conditioning design can be equipped with special handles for easy transport, in the form of filtering applied to the fine mesh. Different food, that is produced by the power supply unit, allows you to apply conditioning in a number of modes of supply of cold air that will control speed mechanism-switch.

Radiator device has a plate appearance. Tubes that extend from him and placed the rubber hoses and secured with clamps. One hose fed water, and in the other it appears. The main indicator in this system becomes a high-speed mode, in which the passage of water through the radiator device and at the same time, the working speed of the fan motor. This is what determines the achievement of rapid cooling of the building and air conditioning to make not so difficult. The positive side of this invention is that the condensate is not formed, as in the radiator device and the hose, which is embedded in the body.

Those who wish to see the whole process of making a homemade conditioner, you can watch the video

Content related