Drilling rig for water with their hands

Every person that has your plot, knows how important it is to have your own water source. It is not a privilege but a necessity, without which it is impossible to take a shower, wash fruits and water the flowers. Of course, someone will remember about the mythical centralized supply of water in rural areas. But this is nothing more than a fantasy.

At the moment the only possibility to get a good source of water in the country is to make the rig your own hands and use it to drill a well. Believe me, it’s not as difficult as it might seem at first glance. But you will have to make some effort to achieve the result.

The types of drilling rigs for water ↑

Before you can build drilling rig for water with their hands you need to understand the features of the most popular designs. We can distinguish four main types that are most often used by builders:

1. Auger drilling rig for water. In the process, the auger gets to the ground. Water for washing is not needed.
2. Shock-rope design. The system consists of a frame and base in the shape of a triangle. Main work is done by a chisel or bailer, which are mounted on the cable.
3. Manual installation with the rotor is the easiest, from an engineering point of view, option. It even has no motor. Used for drilling human power. Similar installations for the extraction of water is used very rarely in professional drilling because of the slowness and labor intensive.
4. Rotary system for the extraction of water provides an effective hydroporinae.

As you can see, each drilling rig for water works according to a certain principle on the basis of unique design. For example, if you implement percussion-cable drilling with their hands, the destruction of the soil will occur with a load. It will rhythmically fall down, destroying layer after the layer.

If you use when you work rotating drill, you can both win and lose. The win is that you need to exert less physical effort. The main difficulty lies in the design of the structure itself. It is quite cumbersome and complicated in terms of technology. So you need to put a lot of effort to make it.

Some of the details to the rig, collect the hands, will have to order Turner. Importantly, the results of your work became the professional machine that will cope with the task. Besides, after using you will be able to resell or lease.

Quite often after the successful drilling of the well on his land to the person who carried out the project, start to ask the neighbours to do the same. Therefore, the construction of drilling rigs for water with their hands may be the first step to beginning a successful business.

The types of drills ↑

Not only drilling rigs can be divided into types. Borax, which you will use to create wells with their hands, also have their own classification:

• Spoon drill for the drilling rig for the water. This structural element is used on plastic soils. This is usually a mixture of sand and clay. There are two versions. In the first the bottom of the spoon made in the shape of a bucket with a cutter on the left side. The right side is executed in the form of a lateral rib. In the second embodiment, the spoon is made of pipe of suitable diameter.
• Coil Bur is needed to pass a dense loams. The device works like a corkscrew. He quickly screwed into the ground. The blade design is done in the form of a dovetail. In this case it must be pre-tempering. For the construction you need services of a professional Turner, with his own hands right here on your own will not work.
• A chisel is needed to break through the solid rocks of high density. When creating a design, special attention should be paid to the angle of taper. From this characteristic depends what ground you will be able to work afterwards. For hard rocks need 110-125 degrees, for soft enough 35-70. The great value has the form.

Choosing the correct borax also plays an important role in creating the rig for the water with their hands. If you pick up the wrong drill, you simply will not be able to drill down to the desired level.

Step by step instructions create a hand rig with his own hands ^ a

Necessary tools and materials ↑

Before starting to collect hand-drilling rig for extraction of water with their hands to check the materials and tools you must have:

• Sanitary cross.
• Hacksaw.
• Steel pipe. Its diameter should be half inch.
• Die.
• Adjustable wrench 1.
• Eviction from a half-inch in diameter.

Once all the tools and materials assembled, it is ready for the construction of the construction with his own hands. But first you need to prepare segments of the pipe. They will serve as the basis of a homemade drilling rig for water.

The algorithm for generating ↑

To create drilling rig for water with their hands need to use quality materials and tools. Thus the algorithm does this. It consists of the following stages:

1. To create the cross design of the tubes have at the ends to make cuts. While its length should be two inches.
2. Weld steel plates to the pipe end face. Each plate needs to be made in the form of a tip.
3. Ensure the water supply. This can be done by their hands. Just attach the hose to the cross hole. For the density of the connection need to use a special adapter. This will increase the efficiency of the rig.
4. In the hole cross mounted plumbing thread. Best of all, she was from PVC. In a pinch you can use hemp fiber.
5. To the bottom of the tube with the cut tip. To make this possible you need to use the eviction.

After all these points you will get ready and set manual drilling rig for water, which you have made with your own hands. But there is one important thing that you should know. Upon reaching the bore of the recess in one meter being replaced for a longer section of pipe.

Do electric drilling rig for water with their hands ↑

Traditionally you should start with the selection of the necessary tools to create the rig for the water with your hands, you will need:

• drill with bit set,
• screwdriver,
• Bulgarian,
• device for welding.

She drilling rig for water consists of the following structural elements:

• jelonki,
• glass,
• frame.

To work on the production of water with their hands were moving faster, the rig should connect to the motor. Optimal cartridge weight is 70-80 kilograms. During the cleaning of the bottom meets the bailer. The manufacturing process consists of following stages:

1. Glass must be manufactured from the pipe. The diameter of the part should be in the range of 11 to 12 cm. the heavier the material the rig for water, which you do with your hands, the better.
2. The bottom cut is made tapering in the form of triangular teeth. A few holes drilled in the cartridge.
3. In the ground dug a pit. It will drop a glass rig for water, which you build with your own hands.
4. Bur is made of steel pipe. In section it should be 10 cm At the upper end of the screwed thread. On the opposite side is a screw the screw in 1-2 turns. Its diameter of 20 cm.
5. Steel blades are welded to the auger.
6. The bar is attached to the tee.

Drill rig ready for the water you have to go. As soon as the depth exceeds 1 metre — rod is lengthened. As you can see, all this can be easily done with your hands, and you have a plot of water.

The results ↑

Creating the rig for the water with your hands will allow you to receive full autonomy and its own sources. Design does not represent special complexity, and assemble it for everyone.

• How to drill a well with their hands
• How to clean and equip the well with their hands
• How to make scaffolding with their hands