The contents
After these items appeared on the current market, installation of window sills of plastic Windows once acquired the distribution among the owners of modern flats and houses, however, they have not lose their popularity. Because the plastic profile is a safe and, at the same time, environmentally friendly material, and all products for which production it was used, are extremely careful control. Today, however, many do not know how can I install a window sill after window installation, as the installation of such structures and what you’ll need.
Why the installation of such sills became so popular? ↑
These sills have a number of advantages. First and foremost, it is worth noting that they have small weight, and thus become so popular, so how to set the sill on the plastic window can virtually everyone. It should also be said that they are extremely easy to use, does not require painting, resistant to mechanical damage, and are resistant to impacts from light and high temperatures.
Plastic window sills today can be found in a rather large range, due to which there is nothing difficult to choose the right product for any window in the room. However, being involved in selecting this design, you will need to decide how it will be implemented by the installation of window sills of plastic Windows with their hands or with the help of qualified professionals. Of course, the second option is more simple but at the same time, it is much more expensive, as a result, many owners prefer to do everything on their own.
How is the installation of plastic window sill? ↑
There are several technologies which can be carried out the installation of plastic window sill. The first technique involves fastening products with specialized composition. It is worth noting that this method has been used for a long time, but lately it has lost its relevance, since there have been a large number of new technologies that are more modern and easy to use.
The most rapid method is the use of specialized screws. In this case, can easily be carried out installation of window sills of plastic Windows with their hands, as you just need to drill a hole in the frame in which we can then insert these items. After that, the surface is additionally processed by a specialized silicone sealant, and edge of the sill is put under the frame and secure it with screws.
In order to ensure the rigidity of the plastic sill, uses special lining, and the area under the product additionally zapisyvaetsya.
Another method is the installation of window sills of plastic Windows with metal spring clips that also are screwed to the profile with the help of specialized screws. In the groove formed between the bracket and frame, and will be installing this product.
Latest technology does not provide for the use of any additional components like brackets or screws. Of course, this method is the most durable, but at the same time, experts use it as the most reliable. The essence of this technology lies in the fact that the installation under the sill plastic window put a special lining that will be there until such time as the edge of the item will not be included tightly under the window frame.
The last three methods have become very widespread in its use, because each of them has advantages and disadvantages that make them relevant in different situations. To make the right choice, you should consider the features and benefits of each method in order to choose the one you consider most relevant.
Useful tips ↑
- The plastic sill needs to be fixed inside and also be at the bottom of the window opening;
- at the bottom of the sill at a distance of not more than 60 mm from its edge is a groove whose depth is about 20 mm. It is used to divert water in the process of using this product;
- the final stage of installation occurs only after will be fully prepared lower zaglushiny;
- the lower part of the side slopes of the solution is completely cut down up to the walls, after which the surface is cleaned from dirt, dust and other things that can interfere with installation and further operation of the product.
Step-by-step installation of plastic window sill ↑
Install sills and slopes on the plastic window has no difficulties, especially if we are talking about the plastic products. Some specialized skills or skills are not required, it is important to comply with exceptional accuracy when sawing the PVC when it is necessary to exclude the strong pressing in order to avoid the appearance of chips or scratches in the place of the cut.
The installation is as follows:
- conducted a sweep of the surface;
- with the horizon level on beacons exhibited the window sill. Mandatory the product must be tilted approximately 5 mm in order to prevent moisture that accumulates from condensation, do not linger on the windowsill, and gradually trickled down;
- the free space is completely filled with specialized foam, the excess of which is then carefully cut with a special knife construction;
- the ends of the product are carefully protected plugs, and the plastic sill after the installation is cleaned of protective film.
This sill is fastened with glue or mortar, but if necessary you can also use screws for mechanical support. In addition, if you want the battery warm air is normally raised and spread throughout the room, you will need to leave an overhang of up to 60 mm. along the length of the same plastic sill should not be wider than the window opening more than 20 cm.
Installation of wooden window sill ↑
Installation of wooden window sill is more complicated, resulting in high quality fit on the boards over time everything has already gradually started to forget. However, many continue to order and use these products, because they are attractive appearance, and are environmentally safe. In order to provide for proper installation of the sill of this type, you will need to initially pay attention to the source material, because on the Board there should be no knots or defects.
The installation also carried out in several steps:
- initially, the Board carefully ostragivajut on all sides.
- after that, the Board is given the desired form, and is sampled kalevok and Letnikov. Under lesniki provides for the groove width from 7 to 9 mm and a depth of 6 mm. It should be located approximately at a distance of 2 cm from the front side of the product;
- after it is finished processing, you will need to trim the boards to the desired length and shape. It is quite important to be available to all window boxes on the same level horizontally;
- now the work begins from the lower portion of the Board, which is placed on the wall. To it will need to fix the felt that is treated with antiseptics and then lathing is fixed to the Board;
- prepared Board starts approximately a quarter of the bottom bar of the box, then fastened to the box when using long nails, due to which is fixed even more securely. Thus it is necessary to cut the nail, and hammer the ends in the lower part of the bar box, and drip Board to impose on the protruding nails.
The process of installation of wooden window sills window is very simple and it can hold everyone. Simply remember a few key points, be able to competently perform the above steps and have the right set of tools that will help you in the process.
If you want to see how is the installation of window sills of plastic Windows with their hands, the video below is for you:
