Installation and device coffered ceiling
The contents
With the need of a competent construction of the housing space facing every person in life, however, it is important to holistically approach this issue, the choice of building materials, as well as to applied designs. Today becoming increasingly popular coffered ceilings. Coffered ceilings can be made of wood — in the form of beams attached to the ceiling, drywall — looks very similar to niche. In other words, Quezon ceiling — polygonal design, which is presented in the form of numerous pits. In Latin “lacunar” or coffered ceiling, a recess which can be properly decorated and very impressive to look. For the first time these designs have appeared in Greece, but at that time they had a completely different purpose. First, beam and floor served as additional support for the building. To date, Quezon design is a design solution in many interiors are often decorated with additional lipkami, giving brightness and an additional luxury room.
Modern ceiling in the interior ↑
When choosing a particular design, you should pay attention to the fact that this design will be appropriate for buildings with high ceilings, as in the houses of conventional plan, with a ceiling height of 2.5 metres will not be able effectively to emphasize the decorated ceiling.
It is important to note that the coffered ceiling will be absolutely appropriate for the living room and bedrooms and a study or billiard room are exclusive to stand out luxury. When equipment is thus a country house, you will be able to skilfully emphasize the modern style and design of your estate.
Wooden ceiling equipment ↑
Timeless classics impresses with its beautiful and striking types, but the coffered ceiling equipment can accentuate any decor. During project development, future coffered ceiling, you can turn to professionals or perform the installation yourself.
When choosing a wooden coffered ceiling is necessary to pay attention:
- the shade of the wood are harmonious with the interior of the room;
- it is important to consider the height of the profiles below coffered ceiling was professionally designed.
When choosing the best equipment is to use the initial sample to final result to a good and harmonious combination of girders and beams.
Ceiling elements from MDF and drywall ↑
If you need to conserve on the materials used, you can use the elements MDF it will be much cheaper, since the use of sheets of hardboard instead of the whole cloth of the wood will allow some overlap to avoid unnecessary spending on natural material.
The ceiling is made of molding or drywall can be safely attributed to the budget vehicle. However, the building decor is quite difficult to be mounted.
It should be noted that the principle of creating a caisson structures is the manufacture and installation of curly niches or ledges of gypsum Board, wood or MDF that after decorated by the molding.
Design your own hands ↑
If necessary, the organization works on their own, it should be understood that this is a laborious process, which is important to a comprehensive approach. It is recommended to have a specific building set:
- the caisson, which can be pre-purchased at hardware stores.
- Reiki to 15 cm that will be needed for installation of beams;
- the necessary adhesive for wood or MDF;
- nails, hammer, saw;
- square meter.
In addition, it is necessary to consider the design completely and to determine, ultimately,.
Additional emphasis will be step-by-step instruction for installation of coffered ceiling with his hands:
- at the initial stage it is necessary to Prime the surface and make wallpapering bright colors. You must use plain and not textured Wallpaper;
- after drying the surface is recommended to produce a marking of the future installation of a skeleton from wooden planks, pre-defining the positioning of the rod Central part of the structure.
- the erection of beams, because they are the supporting structures of the coffered ceiling. Should strigapoderus design of the future caisson equipment;
- when using the stretched string is installing bars on the perimeter and in areas designated by the project;
- after the boards are installed, installation of the panels, which are fastened by means of staples and nails. Thus the square of the future design.
Summing up, it should be noted that the overall technology installation coffered ceiling — mount the longitudinal bars and supporting transverse parts.
The installation of the slabs is also carried out on certain stages:
- at the initial stage of the erection of the first plate by means of metal brackets, which are mounted in one recess of the caisson. On the opposite side, next to the groove element is the installation of mortgage strips;
- after the establishment of the plates, it is recommended to check the corners and install the strips Bessonov through mortgages. Installation is carried out so that the short part was in one direction, while the long elements is positioned perpendicularly;
- along the wall, it is necessary to equip the frieze, which after is to decorate rails.
The decoration of the ceilings ↑
In the initial stages of decoration, you should use putty and carefully to eliminate the possibility of cracks and chips. In addition, it is important to apply a grid serpyanku and to carry out the installation of controllaw. After carried out the finishing work necessary to perform the cleaning of the surface and open the surface of the primer, thus completing the preparation for the final stages of the installation of the ceiling. As a final touch in the finish, it is recommended to use a baguette, which it is important to correctly set by gluing to the frame structure. At the final stage it is recommended to use contrasting colours for dyeing niches coffered ceiling.
Professional installation with your own hands