How to make fence from plastic bottles
The contents
- General provisions
- In addition to the positive characteristics, a fence made of plastic bottles has its drawbacks:
- Varieties of bottle fences
- Variations create fences
- Low fences
- Frame construction
- How to make meter fence out of bottles with their hands: step by step instructions
- Visual zoning of the site
- The fence is rack plastic
- How to make a fence using plastic canvas
- Fence with his own hands from the tubes with plastic bottles
- Conclusion
Plastic bottle. That she did everything with creative minds. Bottle plastic (PET) can be seen everywhere. Today, it has ceased to be a raw material, ceased be exclusively for industry. A plastic bottle in the right hands easily turns into all kinds of decorations: flowers, crafts in the form of animals, trees, sidewalks, curbs, fences. Recently the owners of private homes began to use it as material for the construction of fences. Fence plastic from bottles with their hands to make very simple.
General provisions ↑
Why PAT got an unusual application. The secret is in its features:
- First of all is the price. Of course individually, as a product it is not sold as waste after consuming the drinks. In fact – it is generally considered a free material.
- The easy availability. Follows from the preceding paragraph.
- Water resistance. Because it was originally designed to store liquid, consequently, the impact of temperature regimes it moves with ease.
- The ease of use. Low specific weight, flexibility, ease of cutting, give the craftsmen a lot of fantasies.
- Durability. PET production technology is able to maintain its quality for over 180 years.
In addition to the positive characteristics, a fence made of plastic bottles has its drawbacks: ↑
- It’s very easy to break by applying a mechanical force.
- It is not a good protection against intruders, thieves.
Therefore, the use of such structure is only as decor or in the zoning of the site.
Varieties of bottled fences ↑
Today craftsmen have designed and brought to reality the following kinds of design of plastic bottles:
- Frame fences.
- Low decorative fences.
- Capital structure.
How to build a fence from bottles with your hands? A worthy use of this material can be lightweight, translucent oporoza for the flower garden, front garden, or even a fence. Given its unique properties are ideal raw material for creating outdoor structures.
Variations create fences ↑
There are a great many. Use in any part of it: the covers, the bottoms, the main parts of PET. What part of the bottle to choose to design your fence, choose your own. One thing is important – your work will solve two problems at once: the issue with disposing of it as garbage and the creation of decorative okoroji for your own site:
- Flower beds at the cottage.
- Framing or zoning of the flower garden.
- Design garden paths.
It will take quite a number of bottles so will probably need recourse to the neighbors or relatives for help. To create a complete and relatively solid construction you’ll need in addition to PAT are still sufficient supplies, and it is:
- A binder solution.
- Support.
- Mesh, on which if necessary will have to mount the plastic.
Low fences ↑
The bottom (the bottom) is very similar to the flower. If its nice paint colors and then protect the perimeter of the flower bed, you get very original.
How to make a low picket fence for the flower bed? It is constructed quite simply: the plastic bottle are cut off, then dig deep into the soil. It is very important that the height was smooth.
Frame construction ↑
The photo below shows the layout of bottles.
To create such a fence in advance to make a wire frame, or install wooden supports.
You can, alternatively, use the mesh-netting, but the cell size is matched to the cylinders. Then just paste it matched in color PAT, if you are planning to create a pattern or design. Such a structure is able to refresh any hedge, breathe a new breath.
How to make meter fence out of bottles with their hands: step by step instructions ↑
The scheme of constructing the fence from plastic bottles with their hands:
Before you start construction, you need to stock up on the necessary quantity of PET of not less than 5 pieces for one fence. The cylinders are pre-cleaned of dirt, labels. If you take 5 pieces for one fence, then 4 can cut off the bottom. In other words, all but the last need to do a similar operation. Then, as shown in the picture on a whole bottle, plastic wear each cut.
The next step that you need to do is to make a hole in the middle from top to bottom. The hole diameter must strictly comply with the wire that will subsequently be inserted into it.
Collect all the spans on the number required for your fencing wire frame. The number of such shtaketin can be very different. It all depends on what aperture you plan to build.
Ready spans weld weld or fasten in some other way, for example, fasten the wire to the supports installed.
You can make a wooden frame for him to fasten the screws of the lid, and then screw cap bottles, plastic,.
Visual zoning of the site ↑
A very low fence (borders) are widely used in suburban areas for zoning. Plastic bottles in this case, pour half deep, on the surface, is the lower half. To make a border with your own hands is quite simple. You need to fill the bottle with earth, sand and other bulk materials.
Fence-shelf plastic ↑
How to make a fence from plastic bottles with their hands? The photo shows that this fencing needs to be done and set around the perimeter of the wooden supports with transverse rails-racks before you install them on the plastic bottle, the surface of the rails should be thoroughly lubricated construction glue, to weight and snug fit, they are pre-filled with sand or earth.
Fence made of plastic bottles with their hands video:
How to make a fence using plastic sheeting ↑
This method is very unusual, very rarely used. This is due to the complexity of work. In order to obtain the desired fabric you need in two-liter bottles cut vertically middle part. The resulting canvases are joined together by a stapler. The canvas can be used not only for hedges, but, for example, in the construction of gazebos on a country site.
Fence with his own hands from tubes plastic bottles ↑
PET builds up gradually in many Russian families. They can be thrown away as useless rubbish, and you can build the original fence in a country house or build in the yard of an apartment house nursery sculpture, decorating the Playground. To make the fence caps from plastic bottles with their hands, the photo shows a good example, just like from the bottle, and the shape and pattern to choose at their discretion.
Conclusion ↑
How to make fence from plastic bottles with their own hands to give you already know, the example fence decoration caps from them you see in the photo. To create any structure is quite simple. This does not require large cash investments. All that is required is patience, imagination, handy materials. In most cases, is a unique way for fencing, the zoning of suburban area. PAT is a unique material for homemade. It is possible to build any design or decor for a country house. Following is a small gallery in a photo of the finished craft, buildings, structures.